Securing The Illuminator; Figure 7-4: Bracket In The Level Position (Left) And Angled (Right) - Without The Camera Head (Top) And With The Camera Head (Bottom); Figure 7-5: Illuminator Attached Using Two Brass Thumbscrews (Left), Or Single Thumbscrew (Center), Rotates Around The Mounting Bar When Its Knob Is Released To Adjust Tilt (Right) - SR Research EyeLink 1000 Installation Manual

cables should emerge from the side of the Camera Head providing the most protection from
them getting bumped or crimped as the fiber optics are the most delicate part of the apparatus.
Turn the knob on the back of the clip so that it threads into the Bracket. As the knob is
tightened the Camera Head will become immobile at the position and orientation at which it is
being held.
Figure 7-4: Bracket in the Level Position (left) and Angled
(right) – without the Camera Head (top) and with the Camera
Head (bottom)
Figure 7-5: Illuminator attached using two brass
thumbscrews (left), or single thumbscrew (center), rotates
around the Mounting Bar when its knob is released to adjust
tilt (right)
7.4

Securing the Illuminator

There are two different Long Range Mount Illuminators available for the Long Range EyeLink
1000. The most common illuminator will have infrared peaking at 890 nm. At this wavelength
Long Range Mount Installation 43
2005-2010 SR Research Ltd.