Eyelink Response Device Installation; Figure 2-5: The Camera Adapter (Left) With Camera Head Inserted (Right); Figure 2-6: Vpixx Button Boxes (Left), Vpixx Button Box Parallel Port Pin Adapter, Modified Gravis Destroyer Gamepad, And Microsoft Usb Sidewinder Gamepad (Right) - SR Research EyeLink 1000 Installation Manual

2. Place the Camera Head into the Camera Adapter, with its two attached cables emerging
from the opening on the side of the bracket (see the right side of
3. Replace the crosspiece and fasten the thumbscrews
Figure 2-5: The Camera Adapter (left) with Camera Head
Further instructions regarding the use of the Fiber Optic Camera in various types of
mounts appear in later sections describing the installation steps to be taken for each
type of mount.

2.4.4 EyeLink Response Device Installation

Figure 2-6: VPixx Button Boxes (left), VPixx Button Box
gamepad, and Microsoft USB Sidewinder gamepad (right)
If you have purchased an optional button box/response device for the Host PC (VPixx
Professional button box, modified Gravis Destroyer Gamepad, or the Microsoft USB
Sidewinder- see Figure 2-6) it should be plugged into the Host PC before booting.
VPixx Professional Button Box Installation. The VPixx button box plugs into the parallel
port on the Host PC motherboard and requires the additional parallel port pin adapter shown
in the Figure 2-6.
Modified Gravis Destroyer Gamepad. The modified Gravis Destroyer gamepad plugs into the
parallel port on the Host PC motherboard. Note that the back two buttons of the Gravis
Destroyer gamepad are not operational.
Microsoft USB Sidewinder Gamepad. If you have acquired a USB Microsoft Sidewinder game
controller (no longer available from Microsoft or SR Research), plug it into a USB port on the
Parallel Port Pin Adapter, modified Gravis Destroyer
.
inserted (right)
Installation and System Cabling
2005-2010 SR Research Ltd.
Figure 2-5)
.
13