Fiber Optic Camera System Installation; Figure 2-3: Fiber Optic Camera Components - SR Research EyeLink 1000 Installation Manual

2.4.2 Fiber Optic Camera System Installation

In general, the Fiber Optic Camera Head should be powered before the Camera Base
Box and the Host PC. Should the camera be unresponsive, power off the Camera Head
and then re-power it so that Camera Head is powered before the Camera Base Box.
Fiber Optic Camera Pre-installation Checklist
2.4.2.1
Ensure that you have the following listed components before you start installation.
1. EyeLink 1000 Fiber Optic Camera components appear in Figure 2-3. Items ii and iv are
only supplied if setting up the fiber optic camera for use with a Desktop, Tower, Primate
or LCD Arm Mount.
i. Camera Base Box
ii. Camera Adapter (for use with Desktop, Tower, Primate and LCD Arm Mount
options)
iii. Camera Head
iv. Integrated Extension Cable (for use with Desktop, Tower, Primate and LCD Arm
Mounts)
v. Fiber Optic Extension Cable
vi. Fiber Optic Camera 5V power supply with pressure-release connectors
(alternative power sources include a Battery Pack Power System or BNC
connector-based power cable)
10 Installation and System Cabling
2005-2010 SR Research Ltd.

Figure 2-3: Fiber Optic Camera Components.