Resize Existing Disk Partition; Figure 11-2: Enable System Commander; Figure 11-3: Select Partitioning Then Manual Partitioning - SR Research EyeLink 1000 Installation Manual

Host PC. The installer will prompt you to create 'Rescue Disks', to register, to check for
updates from the web, etc. None of these steps is critical, so they may be skipped.
4. After installation, run the System Commander program by going to the Windows "Start
Menu" and selecting the "System Commander" entry.
5. A "Utility Wizard" dialog box will automatically be displayed (see
"Enable System Commander" entry, click on "Next", exit the System Commander
program and restart the computer, booting from the System Commander Boot CD
supplied.
11.2

Resize Existing Disk Partition

The next step is to resize the existing partition to make space for a 5GB EyeLink Host
Application partition.
Insert the supplied "System Commander Boot CD" into the CD drive and restart the computer,
booting from the CD. You may need to configure your BIOS boot order so that the CD is first in
the Boot Priority. On Dell PCs, Press F12 to get the Boot Menu and the select Internal CD as
the boot device.
Once you have booted from the CD, select "Partition Commander or Restart", and then select
'Manual Partitioning' as illustrated in Figure 11-3.

Figure 11-3: Select Partitioning then Manual Partitioning

Appendix B: Windows 2000/XP Host PC Software Installation

Figure 11-2: Enable System Commander

Figure 11-2
2005-2010 SR Research Ltd.
) select the
79