TAC Xenta OP Handbook
1.3 More information
8 (36), 0-004-7506-4 (EN)
Chapter 5
This chapter contains technical data on the TAC Xenta OP.
TAC Xenta OP is also described or mentioned in the following
documents:
• the TAC Xenta OP Operator panel data sheet (C-98-05)
• the handbooks for the different TAC Xenta controller units
• the "TAC Menta User's manual"
Stand-alone TAC Xenta 300/3000 controllers and I/O modules can be
commissioned by using the Service menu of TAC Xenta OP (which is
not the same as the local OP service menu). This procedure is de-
scribed in the TAC Xenta 300 and 401 Handbook.
1 Introduction
TAC AB, 2001-08-08