Access Code - t.a.c. Xenta OP Handbook

TAC Xenta OP Handbook

4.5 Access Code

28 (36), 0-004-7506-4 (EN)
Special cases
If you want the time channel to be turned off for the whole day and
night and use the 24 hour clock, you indicate this by
00:00-00:00
and with the AM/PM clock (please refer to section 4.1)
12A00-12A00
If, in stead, you want the time channel to be turned on for the whole
day and night and use the 24 hour clock, you indicate this by
00:00-24:00
and with the AM/PM clock
12A00-00P00
In the latter case the end time (24:00 respective 00P00) is a normally
'nonexistent' time value.
Every item that is displayed in a menu on the operator panel has an
access level, which can be low, medium or high. An item with low
access level will always be visible on the display of the operator
panel.
To show items, with access level medium or high, a correct access
code has to be given. There is one code giving access to low and
medium level items and one to give access to all levels.
The default codes are
Medium level: 1111
High level: 2222
To change access level go to the following menu:
AH02: ACCESS CODE
CODE: 0000
Change code to
extend menu
Use to move the cursor between the digits and use
to change their value. When finished, leave the menu with
If the correct code has been entered, some more items will now be
visible in the list, for example "Edit Access code":
4 Dialogs with TAC Xenta 300 and 401
TAC AB, 2001-08-08
and
+ –
.