t.a.c. Xenta OP Handbook page 27

TAC Xenta OP Handbook
Holiday chart
TAC AB, 2001-08-08
To get to the next schedule controlling AH02 press
AH02: Time schedule
1234567
08:00–12:00
As the cursor is positioned under "08",
move the cursor to "12". Use
"13". Press once and adjust the minutes.
When finished, press
return to the previous menu level.
The week schedule can be modified by a Holiday chart which defines
conditions for certain dates, for example when Christmas Eve occurs
on a workday:
AH02: Holiday chart
1234567
14:00–17:00 MTWTF
**-12-24 : **-12-24
The asterisks (**) act as "wild card", that is, the date will in this case
be valid each year.
Use and to change the time and date values. Use
+
–
move the cursor between the fields. To obtain asterisks in the date
fields, toggle the month value past 12. To obtain asterisks for the year
value, you must toggle backwards from the value 94.
When finished, press
return to the previous menu level.
The Holiday chart is valid throughout the 24 hours.
Note, for example the following case:
Week schedule says
Holiday chart says
The object will be active for the one minute only.
4 Dialogs with TAC Xenta 300 and 401
S
must be pressed twice to
and to change the off hour to
+
–
after the last entry and then use
after the last entry and then use
active 08:00-18:00
active 00:00-00:01
0-004-7506-4 (EN), 27 (36)
once.
to
to
to