t.a.c. Xenta OP Handbook page 3

TAC Xenta OP Handbook
Foreword
TAC AB, 2001-08-08
Welcome to the manual of TAC Xenta OP, version VMX 3.2 and
higher.
Should you discover errors and/or unclear descriptions in this manual,
please contact your TAC representative.
You may also want to send an e-mail to helpdesk@tac.se.
This edition, -4, applies to TAC Xenta OP version VMX 3.2 or later.
The procedure for de-installation of the OP has been clarified and put
in a separate section, 2.7.
The possibility to select which unit system (SI or US Imperial) is used,
when connecting to TAC Xenta 100, is now described in section 3.2.
Foreword
0-004-7506-4 (EN), 3 (36)