Measure A Cuvette - Thermo Scientific Multiskan Sky User Manual

4
Instrument operations

Measure a cuvette

c. Push the power button to run the plate carrier in.
CAUTION Ensure that you select the correct microplate type. An unsuitable microplate may
become jammed in the instrument. When you work in the UV range, use quartz or other
UV-compatible microplates.
2. Access the measurement from the Home screen.
Note If you use Multiskan Sky without the touch screen display, use SkanIt Software to define and
start the measurements and to view the results. For instructions, refer to
on page
3. Define the measurement parameters.
4. Tap Start to start the measurement.
Note Before measuring a μDrop Plate, make sure that the μDrop Plate's serial number and
pathlength have been defined in Settings.
5. View the results of the measurement.
6. Export the results if desired.
The measurement results are automatically stored in Runs.
Measure a cuvette
CAUTION Do not spill any liquids inside the cuvette port.
To measure a cuvette:
1. Access the measurement from the Home screen.
Note If you use Multiskan Sky without the touch screen display, use SkanIt Software to define and
start the measurements and to view the results. For instructions, refer to
on page
2. Define the measurement parameters.
16 Thermo Scientific Multiskan Sky User Manual
21.
21.
"Using SkanIt Software"
"Using SkanIt Software"
Thermo Scientific