Call Park; Fac Mode - Yealink SIP-T41S User Manual

When the new party answers the call, press the Conf soft key to add the new party to the conference.
7.
Repeat steps 5 to 7 until you have added all intended parties.
8.
How to set up a network conference call on specific servers may be different from introduced above.
Contact your system administrator for more information.

Call Park

You can use call park feature to place a call on hold, and then retrieve the call from another phone in the
system (for example, a phone in another office or conference room). If the parked call is not retrieved
within a period of time defined by the system, the phone performing call park will receive the call back.
Note
Call park is not available on all servers. Contact your system administrator for more information.
The phone supports call park feature under the following modes:
FAC mode: park the call to the local extension or a desired extension through dialing the park code.

Transfer mode: park the call to the shared parking lot through performing a blind transfer. For

some servers, the system will return a specific retrieve park number (park retrieve code) from which
the call can be retrieved after being parked successfully.
You may need to configure the call park code and park retrieve code before using call park feature. You
should configure a park retrieve key before using call park feature.
To configure a park retrieve key via phone user interface:
Press Menu->Features->DSS Keys.
1.
Select the desired line key, and then press the Enter soft key.
2.
Select the Retrieve Park from the Type field.
3.
Select the desired line from the Account ID field.
4.
(Optional) Enter the string that will appear on the LCD screen in the Label field.
5.
Press the Save soft key.
6.
The call park code and park retrieve code are predefined on the system server. Contact your
Note
system administrator for more information.

FAC Mode

To configure call park feature in FAC mode via web user interface:
Click Features->Call Pickup.
1.
Select FAC from the pull-down list of Call Park Mode.
2.
Select Enabled from the pull-down list of Call Park.
3.
Call Features
61