Network Conference - Yealink SIP-T41S User Manual

User Guide for the DECT Desk Phone

Network Conference

You can use network conference feature to conduct a conference with multiple parties. The maximum
number of the parties depends on the server.
To use this feature, you need to configure the network conference URI and conference type in advance.
Contact your system administrator for the conference URI.
To configure network conference feature via web user interface:
Click Account->Advanced.
1.
Select the desired account from the pull-down list of Account.
2.
Select Network Conference from the pull-down list of Conference Type.
3.
Enter the conference URI (for example, conference01@example.com) in the Conference URI field.
4.
Click Confirm.
5.
Network conference is only configurable via web user interface.
Note
To set up a network conference call:
Place a call to the first party.
1.
Press the Conf soft key to place a new call.
2.
The active call is placed on hold.
Enter the number of the second party and then press
3.
When the second party answers the call, press the Conf soft key to add the second party to the
4.
conference.
Press the Conf soft key to place a new call.
5.
The conference is placed on hold.
Enter the number of the new party and then press
6.
60
, , or the Send soft key.
, , or the Send soft key.