Placing Internal Calls; Placing External Calls - Yealink SIP-T41S User Manual

User Guide for the DECT Desk Phone
Using the headset

During a call, you can alternate among Speakerphone, Headset, or Handset mode by pressing the
Speakerphone key, the Headset key, or by picking up the handset.
The call duration and far-site's information (name or phone number) are visible on the LCD screen.

Placing Internal Calls

You can make free internal calls between the DD phones/handsets registered to the same base station.
You can place an internal call to one DD phone or all phones registered to the same base station.
The phone/handset must be subscribed and registered to the same base station to place a call.
Note
For more information on registration, refer to
To place an internal call to one DD phone:
Do one of the following:
1.
Press Menu->Intercom.

Pick up the handset. Then press the Intercom soft key.

The LCD screen displays all registered phone names and the All phone option.
Highlight the desired phone name.
2.
Press the OK soft key.
3.
The corresponding DD phone will ring.
To place an internal call to all phones:
Press Menu->Intercom.
1.
The LCD screen displays all registered phone names and the All phone option.
Highlight All phone.
2.
Press the OK soft key.
3.
All other subscribed phones will ring simultaneously.

Placing External Calls

You can place external calls on the DD phone. External calls based on the public telephone network
require the use of SIP lines. Your system administrator needs to assign the SIP line to the phone
beforehand, and then assign the line to the phone as the outgoing line. For more information on the
outgoing line, refer to Outgoing
To place an external call:
Do one of the following:
1.
Enter a phone number.
-
52
Phone
Lines.
Registration.