Call Waiting; Do Not Disturb (Dnd) - Yealink SIP-T41S User Manual

User Guide for the DECT Desk Phone
desired call.
Press the corresponding line key to retrieve the call.
-

Call Waiting

Call waiting allows you to receive another call when there is already an active call on your phone. If it is
disabled, the new incoming call will be rejected automatically.
You can enable call waiting feature to avoid missing important calls during a call. You can also set the
phone to play a warning tone when the new incoming call arrives.
To configure call waiting feature via phone user interface:
Press Menu->Features->Call Waiting.
1.
Select Enabled from the Call Waiting field.
2.
Select Enabled from the Play Tone field.
3.
Press the Save soft key.
4.
Note The call waiting tone works only if call waiting feature is enabled.

Do Not Disturb (DND)

You can activate or deactivate DND on a per-line basis. If DND is activated for a specific line, all incoming
calls to this line will be rejected automatically, and the callers will hear a busy tone.
The DND feature takes effect on the incoming lines that assigned to the DD phone. For more
Note
information on assigning incoming lines, refer to
assigned to the phone, press the DND soft key when the phone is idle to activate DND.
To activate DND via phone user interface:
Press Menu->Features->DND.
1.
The LCD screen displays the incoming lines currently assigned to the phone.
You can activate DND for a specific line:
2.
Select the desired line.
1)
Select Enabled from the DND Status field.
2)
You can also activate DND for all lines:
Do one of the following:
1)
Press the All On soft key.
-
After DND was activated for a specific line on the step 2, press the All Lines soft key. A
-
message pops up to confirm that you want to copy this setting to all lines.
56
Incoming Lines. If only one incoming line is