Basic Call Features; Placing Calls; Answering Calls; Ending Calls - Yealink W60B Quick Start Manual

BASIC CALL FEATURES

PLACING CALLS

To place a call directly:
1. Do one of the following:
• Enter the desired number when the handset is idle.
• Press to enter the pre-dialing screen.
• Enter the desired number using the keypad.
If there are multiple lines assigned to your handset as outgoing lines, press the
desired line. If you do not select a line, the handset uses the default outgoing line to dial out.
2. Press , or
To place a call from the local directory:
1. Press when the handset is idle.
2. Press or to highlight the desired entry, and then press
If multiple numbers for the contact are stored, press
number, and then press
To place a call from the call history:
History
1. Press the soft key when the handset is idle, and then select the desired call history list.
2. Press or to highlight the desired entry, and then press
To place a call from the redial list:
1. Press or when the handset is idle.
2. Press or to highlight the desired entry, and then press
To place a call using the speed dial key:
Long press the speed dial key to call the preset number directly.

ANSWERING CALLS

To answer a call, do one of the following:
Accept
• Press the soft key.
• Press .
• Press .
• Press .
Note:
• You can ignore an incoming call by pressing the Silence soft key or reject an incoming call by
Pressing

ENDING CALLS

Press .

CALL MUTE

• Press during a call to mute the call.
• Press again to un-mute the call.
to dial out.
or again to dial out using the default line.
DECT IP Phone – W60B & W56H
Line soft key to select the
or to dial out using the default line.
or to highlight the desired
or to dial out using the default line.
or .
10
Quick Start Guide