Ending Calls; Redialing Calls - Yealink SIP-T41S User Manual

User Guide for the DECT Desk Phone
To answer a call using the hands-free speakerphone mode:
Press .
1.
With the handset on-hook and headset mode deactivated, you can press the Answer soft key or the
line key on which receives an incoming call.
To answer a call using the headset:
Press .
1.
With the headset mode activated, you can press the Answer soft key or the line key on which
receives an incoming call.
Answering When in Another Call:
If you are during an active call, an incoming call arrives on the phone, do the following:
Press the Answer soft key.
1.
The incoming call is answered, and the original call is placed on hold.

Ending Calls

To end a call:
Do one of the following:
- If you are using the handset, press
If you are using the headset, press
-
- If you are using the speakerphone, press
When a call is placed on hold, you cannot press
Note
soft key
to resume the call, and then press

Redialing Calls

The redial number list stores the last eighteen dialed phone numbers. When the memory of the redial
number list is full, the DD phone will automatically erase the oldest one when a new number is dialed.
You can redial a call from the redial number list.
To redial the last dialed number:
Press twice.
1.
A call to your last dialed number is attempted.
To redial a previously dialed number:
Press when the phone is idle to access the redial number list.
1.
Select the desired entry from the redial number list.
2.
54
, the End Call soft key or hang up the handset.
or the End Call soft key.
, or the End Call soft key.
to end it. You should
to end it.
press the Resume