Technical Data - Phoenix Contact PSI-MOS-RS232/FO 850 E Datasheet

Fiber optic converter for rs-232 interfaces
Table of Contents

Advertisement

4

Technical data

Interfaces
Power supply
Typical current consumption
Standby indicator
Maximum star coupler expansion
Serial RS-232 interface
Operation mode
Data format/coding
Data direction changeover
Transmission speed (automatic detection)
Transmission length
Connection
Optical interface
Transmission protocol
Connection technology
Wavelength
Minimum transmission power (fiber type)
Receiver sensitivity
Minimum (single-mode fiberglass)
Minimum (multi-mode fiberglass)
Maximum (both fibers)
Transmission length including 3 dB system reserve
General data
Bit distortion, input
Bit distortion, output
Bit delay
Electrical isolation
Test voltage
Signaling output
Status and diagnostics indicators
Enclosure material
Ambient temperature
Operation
Storage/transport
Humidity
Dimensions (W x H x D)
Degree of protection
Weight
103266_en_02
24 V DC (18 V DC ... 32 V DC)
100 mA (24 V DC)
"VCC" LED (green)
10
According to ITU-T V.28, EIA/TIA-232, DIN 66259-1
Full duplex
UART (11 bits, NRZ)
Automatic
9.6 kbps ... 115.2 kbps
Max. 15 m
D-SUB 9-pos. (male)
Transparent protocol to RS-232 interface
SC duplex
1300 nm
-5.5 dBm (9/125 µm), single-mode fiberglass
-4.7 dBm (62.5/125 μm), multi-mode fiberglass
-3.4 dBm (50/125 μm), multi-mode fiberglass
-26.5 dBm
-25.5 dBm
> 0 dBm
27 km with F-G 50/125; 0.7 dB/km
22 km with F-G 62.5/125; 0.8 dB/km
45 km with F-E 9/125; 0.4 dB/km
±35%, maximum
< 6.25 %
< 1 bits
RS-232//power supply
1.5 kV
, 50 Hz, 1 min.
rms
60 V DC/42 V AC, 1 A, maximum
Power supply (VCC), transmit/receive data RS-232, fiber
optic bar graph (FO SIGNAL), fiber optic error (FO ERR)
PA 6.6 FR, green
-20°C ... +60°C
-40°C ... +85°C
30% to 95%, no condensation
35 mm x 105 mm x 99 mm
IP20
190 g, approximately
PSI-MOS-RS232/FO 1300 E
4 / 17
PHOENIX CONTACT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents