Setting The Terminator Switch - Epson 1680 Manual

Setting the terminator switch

The scanner has a built-in terminator, which allows SCSI devices to communicate
properly with each other. Depending on your computer system, you may need to change
the terminator switch setting.
Note:
Do not use an external terminator.
Only the scanner is connected
The scanner is the last device in the daisy chain
The scanner is in the middle of the daisy chain
The terminator switch is located
at the rear of the scanner.
terminator on
(other SCSI device)
terminator on
terminator off
(other SCSI device)
17