Table of Contents
Advertisement
Setting Parameters in the Job Parameters Window
In the
list, select the pages in your job in which the media
1.
Type
type will be different.
Depending on the option you selected in the
2.
one of the following steps:
For
a.
Page range
For
b.
Front cover
two (or last two) pages of the job as the cover page (back
cover).
Note: If the imposition type is saddle stitch, select Cover to print
both a front and back cover page on a different media type. Select
Middle sheet to print the internal sheets on a different media type.
For
, select
c.
Inserts
that will precede or follow the insert. Then, in the
box, type the total number of inserts you want to add.
In the
list, select the tray in which the specified media type
3.
Tray
is loaded.
Click
.
4.
Apply
, type the page range in the box.
or
, select
Back cover
or
and type the page number
Before
After
175
list, perform
Type
to print the first
Duplex
Quantity
Advertisement
Table of Contents
