154
In the Resource Center window, click
7.
After a few minutes, the backup completed message appears.
Note: The last path will be saved and displayed to the path box. If the
backup was made to an external media, the displayed path will be the
default: C:\IC-301\General\Configuration.
To restore the configuration of your IC-301 print controller:
On the toolbar, click
1.
The Resource Center window appears.
In the
box, select
2.
Resource
In the
3.
Restore Configuration
The Open dialog box appears.
Locate the directory path in which you backed up the
4.
configuration.
Select the file, and then click
5.
Notes:
•
You may also restore the configuration from an external media.
•
The configuration file extension will always be .cnf.
Click
6.
Start Restore
The Restore configuration window appears.
Select the categories you want to restore, and click
7.
Note: When you restore the configuration, all the custom tables and
sets—for example, new virtual printers—are added to the system.
Chapter 9– System Administration
.
Resource Center
Backup & Restore Configuration
area, click
.
Open
.
.
Start Backup
.
.
Browse
.
OK