Table of Contents
Advertisement
54
Managing the Job Queues
After entering the IC-301 print controller, a job resides either in the
queues or in the
Storage
There are two queues,
•
The
Process Queue
and the jobs that are waiting to be processed.
•
The
lists the currently printing job and the jobs that
Print Queue
were processed successfully and are waiting to be printed. The
also lists held jobs —for example, jobs for which the
Print Queue
specified paper stock is not available.
At any time, you can view information regarding the number and
status of the jobs in the queues. You can also change the order of
the jobs and suspend or resume the queue.
After you start the IC-301 print controller, the queues are
displayed.
Each queue holds jobs in the order in which they enter it. The top
job in the queue is currently running, while all others are waiting to
run.
Note: If there are very short jobs in the Print Queue, several jobs may be
printing at the same time. The jobs marked as printing are listed first and
printed in the order they are listed.
If necessary, you can change the order of the jobs that are waiting
in the queues. You can also view and edit the jobs' parameters.
area, depending on the job flow.
and
.
Process
Print
lists the job that is currently being processed
Chapter 5– Managing Jobs
Advertisement
Table of Contents
