Table of Contents
Advertisement
Setting Parameters in the Job Parameters Window
Saturation
Select one of the following options:
•
: To maintain the gray balance throughout the range
Normal
of colors in the print job file
•
: When you need dark colors that are more intense.
High
Gradation
Select one of the following options:
•
The printer applies maximum dry ink coverage. This is
None:
the default setting.
•
Blue tones appear clearer
Cool:
•
Increases the color saturation
Lively:
•
Increases the contrast
Sharp:
•
Sets the hues in the low densities to a bright reddish
Warm:
color
The
parameter contains a list of gradation tables that
Gradation
were created in the IC-301 print controller Gradation Tool window.
Each gradation table contains specific settings for brightness,
contrast, and color balance.
When you select your predefined gradation table, your job is
adjusted according to the specific table's settings.
Ink Saving
GCR
Select
to conserve toner by replacing the gray component
Yes
(CMY) of pixels with black toner.
The gray component replacement also prevents the consequences
of excessive toner buildup, such as flaking and cracking, or the
"curling" effect that may occur when printing transparencies.
While the gray component of each color is replaced by black, there
is no change in the color quality of the printed image.
169
Advertisement
Table of Contents
