Table of Contents
Advertisement
168
Color Mode
Select one of the following options:
•
To print the job as black and white using Black
Grayscale:
(K) toner only. When a color job is printed using the
option, the Cyan (C), Magenta (M), and Yellow (Y)
Grayscale
separations are also printed in Black (K) toner, giving a
dense appearance similar to the CMYK grayscale image.
Note: Grayscale images created in RGB applications, such as
PowerPoint, should be specified as Monochrome or submitted to the
system with Grayscale selected in the PPD file. This selection
ensures that grayscale images are counted as black and white
instead of color in both the IC-301 print controller and in the bizhub
PRO C500 printer billing meters.
•
To print the job in color using CMYK.
Color:
Color Adjustments
Brightness
Select the required brightness level (the range starts from
, which applies -15%, to
Lightest
Brightness is generally used to make last-minute adjustments to
the print job after proofing. By changing the
can control how light or dark your output will appear.
Contrast
Select a contrast level for the print job, (the range starts from
which applies -10%, to
Less
Adjusting the
Contrast
between the light tones and the dark tones in your image.
is generally used to make last-minute adjustments to the
Contrast
print job after proofing.
Appendix A– Setting Parameters
Darkest
which applies +10%).
More
enables you to control the difference
, which applies +15%).
setting, you
Brightness
Advertisement
Table of Contents
