Table of Contents
Advertisement
Calibration
2.
Place both the printer and scanner charts next to each other
8.
on the platen and follow the instructions in the Calibration
Wizard.
Note: If the calibration chart is not placed within the defined scanning
area on the platen, the calibration process may not be successful. To
ensure that the calibration process is successful, on the bizhub PRO
C500 printer, press HDD>Calibration>OK. Then, press Size
Settings>Full Area Size.
When the last chart is successfully measured, click
9.
save the new calibration.
107
to
Finish
Advertisement
Table of Contents
