Switching The Headset On/Off - Sennheiser VMX 100 Instruction Manual

• The LED
´
flashes red.
• Three beeps are heard in the headset every 30 seconds (3x).
• Less than five minutes of talk time are left.

Switching the headset on/off

Open the microphone boom ³.
The headset is switched on. The
´
LED indicates the current operat-
ing mode:
• If the LED
blue, the headset is already
paired to a mobile phone. The
headset is therefore ready to use.
• If the LED
in red and blue, the headset is not yet paired to a mobile
phone. Pair it as described under "Pairing the headset to mo-
bile phones or other Bluetooth devices" on page 11.
• If the headset is already paired to a mobile phone and if there
is an incoming call on your mobile phone, the call is answered
immediately by opening the microphone boom
further action.
To switch off the headset:
Close the microphone boom ³.
The headset is switched off. The LED
stops flashing.
All settings are saved. The battery lasts
longer, if you switch off the headset
when not telephoning with it.
10
´
flashes slowly in
´
flashes alternatingly
³
without any
´
³
³