Operating the FLX 70
Telephoning with the FLX 70
Accepting an incoming call
Make sure the headset is paired to your mobile phone (see "Pairing
the headset to mobile phones or other Bluetooth devices" on page
13).
When you receive a call, a ring tone is heard in the speaker and the
»
LED
flashes blue quickly. To accept this call if the headset is already
switched on:
Press the hook button
volume buttons
A beep is heard in the speaker.
Start to talk.
To accept the call if the headset is not
switched on:
Press the hook button
3 sec.
The headset is switched on and the call is answered immediately
without any further action, however, there might be a delay depend-
ing on the type of mobile phone you use.
Put the headset on your ear.
Start to talk.
´
or one of the
²
or µ.
´
for more than
»
´
²
µ
17