Gigaset N870 IP PRO Installation, Configuration And Operation page 92

Gigaset N870 IP PRO / ALL UK en / A31008-XXXXX-XXXX-X-XX / telephony.fm / 8/14/18
Using a handset connected to an N870 IP PRO base
Call swapping
Switching between two calls. The other call is placed on hold.
¤
During an external call, dial the number of a second participant (consultation call) or accept
a waiting caller . . . the display shows the numbers and/or names of both call participants
¤
Use the control key
Ending a currently active call
¤
Options
or
¤
Press the End call key
Conference
Speaking to both participants at the same time.
¤
During an external call, dial the number of a second participant (consultation call) or accept
a waiting caller . . . then
Initiate conference call:
¤
Conf.
Return to call swapping:
¤
End Conf.
initiated
End call with both participants:
¤
Press the End call key
Each of the participants can end their participation in the conference call by pressing the End
call key
Call transfer
Connecting an external call with a second external participant.
¤
Use the display key Ext. Call to establish an external consultation call
the number of the second participant . . . the active call is placed on hold . . . the second
participant is called
second participant has answered) . . . the call is transferred
92
www.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4343
to switch back and forth between participants
End active call
. . . a recall to the first participant is initiated
all callers can hear one another and hold a conversation with one another
. . .
You will be reconnected to the participant with whom the conference call was
. . .
or hanging up.
press the End call key
Call transfer options must be set correctly for the PBX/provider (
OK the connection to the other caller is reactivated
. . .
(during a conversation or before the
. . . use to enter
¢
p. 51).