Gigaset N870 IP PRO Installation, Configuration And Operation page 30

Gigaset N870 IP PRO / ALL UK en / A31008-XXXXX-XXXX-X-XX / settings_DM.fm / 8/14/18
DECT manager configuration
Reboot
¤
From the Reboot of option menu select the devices you want to reboot: the DECT Manager
only or the DECT manager and base stations.
¤
Click on Reboot now
DECT Manager log
System log
The system report (SysLog) gathers information about selected processes performed by the
DECT manager and base stations during operation and sends this to the configured SysLog
server.
Activate system log
¤
Mark/unmark the check box to activate/deactivate the logging function.
Server address
¤
Enter the IP address or the (fully qualified) DNS name of your Syslog server. Value: max. 240
characters
Server port
¤
Enter the port number, where the Syslog server expects to receive requests.
Range: 1-65535; Default: 514
If you want to use the Integrator's system log server configuration settings for the DECT man-
ager:
¤
Click on the Use Integrator settings button.
SNMP statistics
The Simple Network Management Protocol (SNMP) is a common protocol used for monitoring
and controlling of network devices. To gather management and statistical information concern-
ing base station events to be processed by an SNMP manager you have to enter the address and
authentication information according to the SNMP server configuration.
¤
Enter the IP address of the SNMP manager server in the SNMP manager address field and
the port number used by the SNMP manager in the SNMP manager port field. Default: 162
To access the SNMP database authentication is necessary.
¤
Enter the SNMP username and the SNMP password.
The SNMP manager access data can be set for the individual DECT manager or for all DECT man-
agers via Integrator configuration (
¤
If for the DECT manager the Integrator configuration should be used, click on Use Integrator
settings.
30
www.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4343
Confirm with Yes . . . the reboot starts immediately.
All existing connections managed by the affected base stations are terminated.
To reboot one single base station:
To set up the system log server settings
p. 37
p. 86.
p. 87).