Gigaset N870 IP PRO Installation, Configuration And Operation page 29

Gigaset N870 IP PRO / ALL UK en / A31008-XXXXX-XXXX-X-XX / settings_DM.fm / 8/14/18
Password
The password must be entered when registering the DECT manager at the Integrator.
¤
Enter a password for DECT manager registration.
You should note this password to have it available, when you will have to enter the account data
later at the DECT manager.
RPN Group
Part of the RFPI for a DECT manager. PARI and RPN must be locally unique in order to achieve that
the RPN group allocated for the base stations of a DECT manager is locally unique in the system
too.
¤
Select the RPN group number for the DECT manager from the option menu. Values: 0 – 3
Four RPN groups imply that there are potentially eight neighbours for a DECT manager. Neigh-
bouring DECT managers must not have the same RPN group.
Example:
RPN groups of neighbouring DECT managers
0
2
0
To ensure, that a handset in 3 cannot see two identical RPN from the left 2 and the right 2 area,
it is necessary, that any DECT manager coverage area in any direction is large enough, to provide
enough isolation between two DECT manager areas of the same RPN group.
Example: Any handset in 3 should either see base stations from the left 2 or from the right 2, but
it must be impossible, that a handset in 3 can see base stations from the left 2 and at the same
time from the right 2.
Capacity
Defines the role of the device the DECT manager is located on. The device role has an impact on
how many base stations and handsets can be handled by the DECT manager (
Small
Medium
¤
Select the desired device role for the DECT manager.
www.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4343
1
3
1
Besides the DECT manager the device acts also as a base station. The DECT man-
ager can handle up to 10 base stations and up to 50 handsets.
There is only the DECT manger running on the device. The DECT manager can han-
dle up to 60 base stations and up to 250 handsets.
If you change the device role from Small to Medium and the local base station was
synchronization level 1, it will be deactivated. Base stations synchronization needs
to be adjusted in order to re-synchronize the system.
0
2
0
DECT manager configuration
p. 6).
29