Gigaset N870 IP PRO Installation, Configuration And Operation page 87

Gigaset N870 IP PRO / ALL UK en / A31008-XXXXX-XXXX-X-XX / dignostics.fm / 8/14/18
Server address
¤
Enter the IP address or the (fully qualified) DNS name of your Syslog server. Value: max. 240
characters
Server port
¤
Enter the port number, where the Syslog server expects to receive requests.
Range: 1-65535; Default: 514
Log level
¤
Mark/unmark the check boxes next to the log information that should be included/not
included in the system log.
If you want to use the same system log server configuration for all DECT managers:
¤
Click on the Use on all DECT Managers button.
SNMP statistics
The Simple Network Management Protocol (SNMP) is a common protocol used for monitoring
and controlling of network devices. To gather management and statistic information concerning
base station events to be processed by an SNMP manager you have to enter the address and
authentication information according to the SNMP server configuration.
¤
Enter the IP address of the SNMP manager server in the SNMP manager address field and
the port number used by the SNMP manager in the SNMP manager port field. Default: 162
To access the SNMP database authentication is necessary.
¤
Enter the SNMP username and the SNMP password.
The SNMP manager access data can be set for all DECT managers here or for each individual
DECT manager (
¤
If the access data defined here should be used for all DECT managers, click on Use on all
DECT Managers.
Storing management information in MIB format
You can store management information for all base stations in MIB syntax.
¤
Click on Download MIB
system file selection dialogue . . . the file with the MIB information is stored in TXT format.
www.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4343
To set up the system log server individually for each DECT manager
p. 30).
Select the location where the MIB file should be stored using the
Diagnostics and troubleshooting
p. 30.
87