Gigaset N870 IP PRO Installation, Configuration And Operation page 10

Gigaset N870 IP PRO / ALL UK en / A31008-XXXXX-XXXX-X-XX / starting.fm / 8/14/18
First steps
8 Register the base stations at the DECT manager
Note: The base stations will go offline for the duration of firmware update.
Further configuration of base stations (step 9) could be done via the Integra-
tor Web-UI (and database). But the base stations cannot learn new settings,
until they have finished their offline status in case of a firmware update.
9 Configure the base station synchronization
10 Configure VoIP PBX or provider
11 Register handsets and perform handset configuration
All the handsets to be used for making calls over the N780 IP PRO must be reg-
istered at the telephone system. Any handset must get assigned an individual
SIP account at the SIP PBX. When registering, the handset is permanently
assigned a VoIP connection as the receive and send connection.
Create a backup to save your configuration
10
www.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4343
If you want to migrate from a small or medium configuration with one single DECT
manager to a multiple DECT manager system, please read the "Migration" chapter
¢
first ( p. 88).
Whenever there are new or improved functions for your Gigaset device, firmware
updates are made available for you to download to your DECT managers and your
base stations. If this results in operational changes when using your phone, a new ver-
sion of this user guide or the necessary amendments will be published on the Inter-
net at
wiki.gigasetpro.com
Select the product to open the relevant product page for your base, where you will
find a link to the user guides.
Select the product to open the relevant product page for your base, where you will
find a link to the user guides.
To find out which version of the Integrator/DECT manager firmware is currently
¢
loaded, see p. 78 and/or p. 83.
¢
p. 35
¢
p. 39
¢
p. 47
¢
p. 54
¢
p. 80