Gigaset N870 IP PRO Installation, Configuration And Operation page 46

Gigaset N870 IP PRO / ALL UK en / A31008-XXXXX-XXXX-X-XX / settings_basestations.fm / 8/14/18
Base stations
Actions
Setting up the base station synchronisation
¤
Select the cluster to which the base should be assigned to from the Cluster option menu.
Base stations only synchronise within the same cluster, meaning that a handover of a hand-
set from one cluster to a neighbouring cluster is not possible. The DECT multicell system can
manage up to nine clusters.
¤
Select the synchronisation level for the base station from the DECT Level option menu.
DECT level 1 is the highest level and may appear only once in each cluster. A base station
always synchronises itself with a base station that has a better sync level. If it sees several
base stations with a better sync level, it synchronises itself with the base station that has the
strongest signal. If it does not see any base station with a higher sync level, it cannot synchro-
nise.
¤
Mark the LAN Master check box, if the base station should act as LAN master.
If synchronisation via LAN is used, there must be one base station acting as LAN master.
Currently the LAN master can only be configured on DECT level 1.
¤
From the Sync Slave option menu select whether the base station is to be synchronised via
DECT or via LAN. For the Sync master leave this column empty.
46
www.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4343