Gigaset N870 IP PRO Installation, Configuration And Operation page 73

Gigaset N870 IP PRO / ALL UK en / A31008-XXXXX-XXXX-X-XX / settings_system.fm / 8/14/18
Enabling CLI access to the device configuration
Only available in the Integrator user interface.
It is possible to perform the device configuration via CLI (Command Line Interface) using SSH
from a remote system. Secure Shell (SSH) is a program for logging into a remote machine and for
executing commands on a remote machine. It provides secure encrypted communications
between two untrustworthy hosts over an insecure network.
Detailed information on CLI commands can be found in the online help of the web configurator.
Activated if password is longer than 7 characters
The CLI access is automatically enabled if you have entered a valid password that has more than
seven characters and click on the Set button.
CLI password
¤
Enter a password for the administrator access to the configuration via SSH. Value: min. 8, max.
74 characters
Repeat password
¤
Repeat the new password entered in the CLI Password (Admin) field.
Show password
¤
To view the entered characters mark the check box next to Show password.
Loading the web security certificate
Only available in the Integrator user interface.
The web configurator is protected by SSL/TLS security mechanism. That means that data transfer
is encrypted and that the website is identified to be who it claims to be. The Internet browser
checks the security certificate to determine that the site is legitimate. The certificate may be
updated from time to time. If a new certificate is available you can download it to your computer
or network and then upload it to the device.
¤
Click on Browse... next to Web security certificate and select the local certificate file from
your computer's file system
added to the certificate lists.
¤
If the certificate requires a password, enter it in the Web security password field.
www.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4343
The user name for the CLI access is cli.
click on Upload . . . the selected certificate file is loaded and
= enabled; = disabled
System settings
73