Gigaset N870 IP PRO Installation, Configuration And Operation page 36

Gigaset N870 IP PRO / ALL UK en / A31008-XXXXX-XXXX-X-XX / settings_basestations.fm / 8/14/18
Base stations
Actions
Editing base station data
¤
Click on
is opened (
Deleting base station
¤
Select the check box of one or more base stations
All selected base stations are deleted. They are shown in the list of pending base stations
again.
Exporting/Importing the base station configuration
You can export the base station configuration and import it into another Integrator, in order to
change the DECT manager assignment.
Exporting:
¤
Select all base stations you want to be transferred via the check mark
address.
¤
Click on Export
file selection dialogue.
Preferably, you want to export and import base stations DECT manager by DECT manager:
¤
Filter the base station list by DM Name. So you can easily export base stations of this specific
DECT manager.
Importing:
¤
Click on Import
computer's file system.
¤
Select the DECT manager into which base station export should be imported from the DM
Name list and the IP address type from the corresponding list.
Pending base stations
The Pending base stations list shows the automatically recognised DECT base stations in the
network that have not yet been registered. If a base station is detected by several DECT man-
ages, there are several entries for one base station. To integrate them into your DECT multicell
system, they need to be confirmed and activated.
The base stations are identified by their MAC address.
You can filter the list of pending base stations by specific DECT managers to get the list shorter
and to add the base stations DECT manager by DECT manager.
36
www.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4343
next to the base station you want to edit . . . the data page for the base station
p. 37).
Select the location where the export file should be stored using the system
Select the previously exported base station configuration file from your
Click on Delete Confirm with Yes . . .
next to the MAC
Click on Import.