Gigaset N870 IP PRO Installation, Configuration And Operation page 20

Gigaset N870 IP PRO / ALL UK en / A31008-XXXXX-XXXX-X-XX / settings_intro.fm / 8/14/18
Configuring the system
¤
Launch the web browser on your PC/tablet.
¤
Enter the current IP address for the Integrator/DECT manager in the address field of the web
browser (for example: http://192.168.2.10).
IP address of the device
If the IP address is assigned dynamically via your local network's DHCP server, you can find the
current IP address on the DHCP server in the list of registered DHCP clients. The MAC address can
be found on the rear of the device. If necessary, contact the network administrator for your local
network.
Your DECT manager's IP address may change occasionally depending on the DHCP server set-
tings (
Logging into/off the web configurator
Once you have successfully established the connection, the login screen is displayed in the web
browser. There are two user roles with different user IDs:
admin
user
¤
Enter the user ID in the Username text field (admin/user).
¤
Enter the password in the Password text field. Default admin/user
¤
Click on Login.
Logging in the first time
You will be asked to change the default password and to set the appropriate radio frequency
band.
¤
Enter a new password in the New password field and repeat it in the Repeat password field
¤
Select the radio frequency band used in your region from the list (
¤
Click on Set to save the settings and to open the administrator interface.
Logging off
You will find the log off function at the top right of each web page, below the product name.
¤
Click on
20
www.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4343
p. 24).
has unlimited access to all functions of the web configurator.
has only limited access to some settings and system information, e.g., handset
registration and some system settings. The user role must be activated before it
can be used ( p. 72).
If you do not make any entries for a lengthy period (approx. 10 minutes), you are auto-
matically logged off. The next time you try to make an entry or open a web page, the
login screen is displayed again. Enter the password again to log back in.
Any entries that you did not save on the telephone system before automatic logoff
will be lost.
Logout
The session is automatically terminated after ten minutes of inactivity.
Always use the logout function to end the connection to the web configurator. If, for
example, you close the web browser without logging off beforehand, access to the
web configurator may be blocked for a few minutes.
p. 82).