Keyless Entry - Ford Edge 2016 Owner's Manual

Note: Allow the power system to open the
liftgate. Manually pushing or pulling the
liftgate may activate the system s obstacle
detection feature and stop the power
operation or reverse its direction. Manually
interfering with the liftgate motion may also
replicate a gas strut failure.
Note: Splashing water may cause the
hands-free liftgate to open. Keep the
intelligent access key away from the rear
bumper detection area when washing your
vehicle.

KEYLESS ENTRY

General Information
The system will not function if:
• Your vehicle battery has no charge.
• The passive key frequencies are
jammed.
• The passive key battery has no charge.
Note: If the system does not function, you
will need to use the key blade to lock and
unlock your vehicle.
The system allows you to operate your
vehicle without the use of a key or remote
control.
E78276
Edge (CDQ, CWB) Vehicles Built From: 07-12-2015, GT4J 19A321 AKA enGBR, First Printing
Locks
Passive locking and unlocking requires a
valid passive key to be located within one
of the three external detection ranges.
These are located approximately 1 m
(3.3 ft) from the front door handles and
the liftgate.
Note: The system may not function if the
passive key is close to metal objects or
electronic devices, for example keys or a cell
phone.
Passive Key
Your vehicle can be locked and unlocked
with the passive key. You can use the
passive key as a remote control. See
Locking and Unlocking (page 39).
Locking Your Vehicle
E157085
Locking sensors are located on each of the
front doors.
For central locking and to arm the alarm,
touch a locking sensor once.
For double locking and to arm the alarm,
touch a locking sensor twice within three
seconds.
Note: Your vehicle does not automatically
lock. If you do not touch a locking sensor
your vehicle will remain unlocked.
Note: When locking your vehicle, do not
grip the door handle.
Note: Keep the door handle surface clean
to make sure the system operates correctly.
45