Rear Seats - Ford Edge 2016 Owner's Manual

Linking a PreSet Position to your
Remote Control or Intelligent
Access Key Fob
You can save preset memory positions for
up to three remote controls or intelligent
access (IA) keys.
1. With the ignition on, move the memory
positions to the desired positions.
2. Press and hold the desired preset
button for about five seconds. A tone
will sound after about two seconds.
Continue holding until a second tone
is heard.
3. Within three seconds, press the lock
button on the remote control you are
linking.
To unlink a remote control, follow the
same procedure – except in step 3, press
the unlock button on the remote control.
Note: If more than one linked remote
control or intelligent access key is in range,
the memory function moves to the settings
of the first key to initiate a memory recall.
Easy Entry and Exit Feature
If you enable the easy entry and exit
feature, it automatically moves the driver
seat position rearward up to two inches
(five centimeters) when you switch the
ignition off.
The driver seat will return to the previous
position when you switch the ignition on.
You can enable or disable this feature in
the information display. See Information
Displays (page 85).
Edge (CDQ, CWB) Vehicles Built From: 07-12-2015, GT4J 19A321 AKA enGBR, First Printing
Seats

REAR SEATS

Adjusting the Rear Seats
Folding the Seatback
When folding the seatbacks down,
take care not to get your fingers
caught between the seatback and
seat frame.
E186789
With the seat empty, pull the lever up to
fold the seatback forward.
Note: Lower the head restraints. See Head
Restraints (page 125).
Unfolding the Seatback
When folding the seatbacks up,
make sure that the seatbelts are
visible to an occupant and not
caught behind the seat.
Make sure that the seats and the
seatbacks are secure and fully
engaged in their catches.
Rotate the seatback upward until the
seatback latches in the upright position.
The seatback will click when it is locked
into position.
129
WARNING
WARNINGS