Memory Function - Ford Edge 2016 Owner's Manual

Power Lumbar
(If Equipped)
E165608

MEMORY FUNCTION

WARNINGS
Before activating the seat memory,
make sure that the area immediately
surrounding the seat is clear of
obstructions and that all occupants are
clear of moving parts.
Do not use the memory function
when your vehicle is moving.
This feature automatically recalls the
position of the driver seat, power mirrors
and optional power steering column. The
memory control is located on the driver
door.
E142554
Edge (CDQ, CWB) Vehicles Built From: 07-12-2015, GT4J 19A321 AKA enGBR, First Printing
Seats
Saving a PreSet Position
1.
2. Adjust the seat, exterior mirrors, and
3. Press and hold the desired preset
You can save up to three preset memory
positions. You can save a memory preset
at any time.
Recalling a PreSet Position
Press and release the preset button
associated with your desired driving
position. The seat, mirrors, and steering
(If Equipped)
column move to the position stored for
that preset.
Note: You can only recall a preset memory
position when the ignition is off, or when the
transmission is in park (P) or neutral (N) if
the ignition is on.
You can also recall a preset memory
position by:
•
•
•
Note: Using a linked key fob to recall your
memory position when the ignition is off
moves the seat to the Easy Entry position.
Note: Pressing any active memory feature
adjustment control - power seat, mirror or
steering column switch (or any memory
button) during a memory recall cancels the
operation.
128
Switch the ignition on.
steering column to your desired
position.
button until you hear a single tone.
Pressing the unlock button on your
intelligent access key fob if it is linked
to a preset position.
Unlocking the intelligent driver door
handle if a linked key fob is present.
Entering a personal entry code on the
Securicode keypad. See Locks (page
39).