Ford Edge 2016 Owner's Manual page 206

Hide thumbs Also See for Edge 2016:
Table of Contents

Advertisement

WARNINGS
If the sensor becomes blocked the
system may not function.
Note: In cold and severe weather conditions
the system may not function. Rain, snow,
spray and large contrasts in lighting can all
prevent the sensor from functioning
correctly.
Note: Do not carry out windshield repairs
in the immediate area surrounding the
sensor.
Note: If your vehicle has a suspension kit
not approved by us, the system may not
function correctly.
Note: Always fit Ford original parts when
replacing headlamp bulbs. Other bulbs may
reduce system performance.
Note: Keep the windshield free from
obstructions such as bird droppings, insects
and snow or ice.
Note: The system may not detect all traffic
signs and may read signs incorrectly.
Note: The system is designed to
automatically detect traffic signs meeting
the Vienna convention.
Note: Traffic sign data provided by the
navigation system contains information
integrated to the data carrier release.
There is a sensor mounted behind the
interior rear view mirror. It continuously
monitors road signs to inform you of the
current speed limit and overtaking
regulations.
The system automatically detects
recognisable traffic signs, such as:
Speed limit signs.
No overtaking signs.
Speed limit cancellation signs.
No overtaking cancellation signs.
Edge (CDQ, CWB) Vehicles Built From: 07-12-2015, GT4J 19A321 AKA enGBR, First Printing
Driving Aids
When the system recognizes a traffic sign,
it will be shown in the display.
Using the System
Switching the System On and Off
Note: The system status and settings will
remain unchanged during ignition cycles.
You can switch the system on and off using
the information display. See General
Information (page 85).
Setting the System Speed Warning
The system has a number of speed
warning levels which can be set using the
information display. See General
Information (page 85).
System Display
E132994
The system can display two traffic signs
in parallel.
You can view the status at any time using
the information display.
The system display is in four stages as
follows:
1.
All new recognizable traffic signs will
appear brighter than the other traffic
signs in the display.
2. After a predetermined time they will
be shown normally.
3. After a predetermined distance they
will be shown greyed out.
4. After another predetermined distance
they will be deleted.
202

Advertisement

Table of Contents
loading

Table of Contents