Ford Edge 2016 Owner's Manual page 47

Hide thumbs Also See for Edge 2016:
Table of Contents

Advertisement

With the Outside Control Button
Opening the Liftgate
1.
Unlock the liftgate with the remote
control or power door unlock control.
If an intelligent access key is within 1 m
(3 ft) of the liftgate, the liftgate unlocks
when you press the liftgate release
button.
E138632
2. Press the control button located in the
top of the liftgate pull-cup handle.
Note: Allow the power system to open the
liftgate. Manually pushing or pulling the
liftgate may activate the system s obstacle
detection feature and stop the power
operation or reverse its direction. Manually
interfering with the liftgate motion may also
replicate a gas strut failure.
Closing the Liftgate
WARNING
Keep clear of the liftgate when
activating the rear switch.
Edge (CDQ, CWB) Vehicles Built From: 07-12-2015, GT4J 19A321 AKA enGBR, First Printing
Locks
E138636
Press and release the liftgate control
button.
Stopping the Liftgate Movement
Note: Do not apply sudden excessive force
to the liftgate while it is in motion. This
could damage the power liftgate and its
components.
You can stop the liftgate movement by
doing any of the following:
Pressing the liftgate control button.
Pressing the liftgate button on the
remote control twice.
Pressing the liftgate button on the
instrument panel.
Activating the obstacle detection
feature.
Moving your foot under and away from
the center rear bumper in a single-kick
*
motion.
*
This method only works for vehicles with
the hands-free liftgate feature.
Setting the Liftgate Open Height
1.
Open the liftgate.
2. Stop the liftgate movement by pressing
the control button on the liftgate when
it reaches the desired height.
43

Advertisement

Table of Contents
loading

Table of Contents