Installation Of Cooling Fan Harness Axis 1 And 2 - ABB IRC5 Product Manual

2 Installation and commissioning

2.9.5 Installation of cooling fan harness axis 1 and 2

2.9.5 Installation of cooling fan harness axis 1 and 2
General
If the robot is going to be supplemented with cooling fans on axis 1 and 2 the
controller has to be supplemented with an internal harness.
Locations in controller
xx0600002686
A
B
C
D
E
F
Required equipment
Equipment
Harness, cooling - Axis 1 and 2 kit
Standard toolkit IRC5
Continues on next page
132
Harness, cooling - Axis 1 and 2
Cable protection
Contactor interface board
Connector A43.X10
Connector A43.X11
Position switch terminals
© Copyright 2004-2018 ABB. All rights reserved.
Article no. Note
3HAC025488-001
See
on page
3HAC047136-001 Revision: M
Standard toolkit, IRC5
305.
Product manual - IRC5