ABB IRC5 Product Manual page 212

4 Repair
4.2 Replacement of panel board
Continued
Refitting
The procedure below details how to refit the panel board unit.
1
2
3
4
5
6
212
Action
DANGER
Before commencing any work inside the cabinet,
please observe the safety information in section
Make sure that the main power has been switched
off on page 26.
xx0200000023
WARNING
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the section
The unit is sensitive to ESD on page 34
Refit the panel board unit.
Refit the lower attachment screw.
Reconnect all connectors.
Perform the function tests in section
on page 196 to verify that the safety features work
properly.
© Copyright 2004-2018 ABB. All rights reserved.
Note/Illustration
xx0400000812
• A: fixed attachments
• B: hole for attachment
screw
Function tests
3HAC047136-001 Revision: M
Product manual - IRC5