ABB IRC5 Product Manual page 120

2 Installation and commissioning
2.8.3 DeviceNet I/O units
Continued
Encoder interface units
The table below specifies the encoder interface units:
Description
Encoder interface unit for conveyor
tracking
Further information
The table below gives references to additional information:
Information:
How to install the DeviceNet I/O
units mechanically and electrically.
Allowed configurations of Devi-
ceNet I/O units and how to setup
the configurations.
How to install the DeviceNet I/O unit
software related in a new system.
Detailed descriptions of all available
DeviceNet I/O units.
120
Found in:
Fit the expansion board and/or field bus adapter ac-
cording to
computer unit on page 232
fieldbus adapter in the computer unit on page
Technical reference manual - System parameters
The application manual for the different I/O buses re-
spectively, see listing in
on page
The application manual for the different I/O buses re-
spectively, see listing in
on page
© Copyright 2004-2018 ABB. All rights reserved.
Art. no.
3HNE 01586-1
Replacement of expansion board in the
and/or
Definition of fieldbuses, IRC5
114.
Definition of fieldbuses, IRC5
114.
3HAC047136-001 Revision: M
Note
DSQC 377B
Replacement of
235.
Product manual - IRC5