ABB IRC5 Product Manual page 215

4
5
Refitting
The procedure below details how to refit the Flange disconnect unit.
1
2
3
4
5
6
Product manual - IRC5
3HAC047136-001 Revision: M
Action
Loosen the two upper attachment screws and
remove the unit.
Disconnect the cables.
Action
DANGER
Before commencing any work inside the cabinet, please observe the safety information
in section Make sure that the main power has been switched off on page
Reconnect the cables.
Refit the unit and fasten the two upper attachment screws.
Refit the two lower attachment screws.
Refit the link to the unit.
Perform the function tests in section
features work properly.
© Copyright 2004-2018 ABB. All rights reserved.
4.3 Replacement of Flange disconnect
Note/Illustration
xx0600003140
• A: attachment screws
Function tests on page 196
4 Repair
Continued
26.
to verify that the safety
215