Compulite
Chapter 4
Blind Mode
You can program and update cues in the blind Mode. When the blind
mode is active, the fixture values in the live editors are not output.
When
BLIND
Using the blind editor
To activate the blind editor
Press
BLIND
The key's LED is on.
To store cues in blind mode
1.
Press
2.
Select fixtures and assign values.
3.
Use any store sequence, including
Note:
advance to the new cue.
To exit the blind editor
Press
BLIND
The key's LED turns off and the blind editor indication is removed from
the command line.
82
is active it is indicated in the command line:
.
to switch to the blind editor.
BLIND
When storing a cue in blind mode, the playback device does not
.
,
.
STORE
SELECT
Need help?
Do you have a question about the Vector Violet and is the answer not in the manual?