Compulite Vector Violet User Manual page 49

Key Name What it does
(minus) Used to remove a channel/spot form a range selection.
—
Example:
SPOT 1
 (dot) Makes the last selection available. Example: Before
pressing
or wheel
Press
fixture selection.
Fixture
Note:
When fixture numbers in the various sets do not overlap,
the command line numeric default is automatically set to
Fixture
set prior to selecting the fixture numbers.
Example:
Channels are numbered 1  100.
Spots are numbered 101  164.
To select (channel) 98, press 98 on the keypad; press 124
to select spot 124.
, selects channels 1, 2, 3, 5.

5 — 4
, the selection was spots 1, 3, 6, and 8.
RESET
 or move a parameter wheel to access the last
SPOT
This is not a key on the console panel.
. When using this setup, it is not necessary to select a
SELECTING AND CONTROLLING FIXTURES
VECTOR
43