Assigning Fade Times To Cues - Compulite Vector Violet User Manual

Compulite
Chapter 4

Assigning fade times to cues

If no fade times are set, the cue default time is automatically assigned.
The default cue time can be changed in
If no time-out is set it defaults to the time-in setting.
Use to set a cut (bump) time.
0
Time settings
TIME
TIME IN
TIME OUT
DELAY IN
DELAY OUT
WAIT
FOLLOW ON
MANUAL
74
Function
Sets the Editor tool bar to cue time mode.
Prepares to set fade times for the current cue on the
master playback device.
On Go, all the fixtures fading to higher values begin their
fade. The fade takes place in the set time.
On Go, all the fixtures fading to lower values begin their
fade. The fade takes place in the set time.
On Go, all the fixtures fading to higher values begin to
count the delay time before beginning their fade.
On Go, all the fixtures fading to lower values begin to
count the delay time before beginning their fade.
Pressing opens two options on the Editor tool bar:
WAIT
and
FOLLOW ON MANUAL
If you set a wait time (
tagged as a follow-on cue.
Fade to the next cue without waiting for a Go command.
"Follow on" of the next cue starts X second after current
cue is entetring
Wait for a Go command before fading to the next cue.
Manual is the default setting for all cues.
Tools  System Settings  Timing
.
), the cue is automatically
WAIT #
.