Temporary Cues - Compulite Vector Violet User Manual

Temporary Cues

Temporary cues are editor groups loaded to an empty playback device.
Temporary cues can be used, in conjunction with the Active feature, as
building blocks for cues. Temporary cues can easily be stored as cues in
QLists.
Temp cues need to be turned ON in the Editing tab (
Settings  Editing
There a two methods for loading the fixtures for temporary cues:
Load fixtures without setting parameter levels. The fader controls

the output level from zr - FL, ignoring the values in the editor.
Load fixtures with parameter levels. The fader controls the output

level from zr to the highest specified level.
ATTENTION!
data please update the snap.
To load a temporary cue
Example:
1. Select fixtures.
2. Optional: Set values.
3. Press
The command line shows:
controls the output level from zr - FL (or up to the set value).
To add fixtures to a temporary cue
Example:
1. Select fixtures.
2. Press
3. Press
The
4. Tap
The new fixtures are added to the temporary cue.
) otherwise it will create a Qlist instead of a temp cue.
Temp cues are stored ONLY in the Snap. To avoid loosing
Load selected fixtures to fader 6.
for fader 6.
SELECT
Add the editor group to the temporary cue on fader 6.
.
STORE
for fader 6.
SELECT
dialog box opens.
Object Exists
.
UPDATE
Playback 1/6: Temporary Cue Assigned
VECTOR
PLAYBACK
Tools  System
. The fader
103