Programming Chasers - Compulite Vector Violet User Manual

Compulite
Chapter 6

Programming chasers

Chasers are QLists that sequence automatically according to the chaser
attributes in the
The chaser designation and all chaser attributes are saved with the
QList.
Chaser attributes include:
Chaser pattern

Chaser behavior when stopped

Chaser direction

To designate a QList as a chaser
1. Load the QList to a playback device.
2. Press
3. Press
The
4. Choose
5. Tap
The QList will run as a chaser. The fader LED is red.
The chaser control keys are:
Key
GO
HOLD
STEP

chaser attributes can be controlled on-the-fly or preset in the
Properties
Chaser rate - controls the speed of the chaser.

XFade - controls the chaser's look. Set to 0 (zero) for a hard chaser

(bump from step to step). Values above zero run a soft chaser (fade
from step to step). The higher the value the longer the fade from
step to step.
Int.(ensity) Limit - sets the maximum dimmer output level.

106
Playback Properties
.
SETUP
(where the QList is loaded).
SELECT
dialog box opens.
Playback Properties
from the
chaser
or .
STORE CLOSE
What it does
Start the chaser.
Stop or pause the chaser.
Manually bump from cue to cue.
Reverse the direction of the chaser.
dialog box.
dialog box.
drop down menu.
QList Mode
Playback