Compulite Vector Violet User Manual page 110

Compulite
Chapter 5
To release fixtures from a temporary cue
Example:
fader 6.
1. Select fixtures.
2. Press
3. Press
The
4. Tap
5. The fixtures are removed from the temporary cue.
To convert a temporary cue to a cue in a new QList
Scenario: The show already contains QLists 1- 3. Covert the temporary
cue, on fader 10 to cue 1 in a new QList (Qlist 4) and store the active
editor content as cue 2 in the same QList.
First, assign a temporary cue:
1. Select fixtures and assign values.
2. Press
3. Press
Now, create a new lighting state:
1. Select fixtures and assign values.
2. Press
3. Press
4. Choose Create
shows:
temporary cue (group) is now cue 1.
104
Release the fixtures in the editor from the temporary cue on
.
STORE
for fader 6.
SELECT
dialog box opens.
Object Exists
.
RELEASE
.
STORE
for fader 10.
SELECT
.
STORE
for fader 10. The
SELECT
New QList.
QList 4 Cue 2 Assigned.
Object Exists
The dialog box closes. The command line
QList 4 now has two cues; the original
dialog box opens.