Machine Overview; For Your Safety; General - Viking MB 443 Instruction Manual

3. Machine overview

MB 443, MB 443 T, MB 448 T,
MB 448 TX:
 MB 443 T, MB 448 T, MB 448 TX:
Self-propulsion lever
2 Recoil starter rope
3 Quick-release cap
4 Lower handlebar
5 Engine
6 Spark plug socket
7 Front wheel
8 Handle, front
9 Identification plate
0 MB 443, MB 443 T, MB 448 TX:
Primer
 MB 443:
Rear wheel
MB 443 T, MB 448 T, MB 448 TX:
Drive wheel
2 Cutting height adjustment lever
3 Handle, rear
4 Grass catcher box
5 Upper handlebar
6 Motorstop lever
0478 111 9823 B - EN
MB 448 TC:
7 Self-propulsion lever
8 Recoil starter rope
9 Handlebar detent lever
 20 Handlebar console
2 Engine
22 Spark plug socket
23 Front wheel
24 Handle, front
25 Identification plate
26 Drive wheel
27 Cutting height adjustment lever
28 Handle, rear
29 Grass catcher box
30 Upper handlebar
3 Motorstop lever

4. For your safety

4. General

These safety regulations must
be observed when working with
the machine.
Read the entire instruction
manual before using the
machine for the first time. Keep
the instruction manual in a safe
place for future reference.
Observe the operating and maintenance
instructions contained in the separate
engine instruction manual.
These safety precautions are essential for
your safety, however, the list is not
exhaustive. Always use the machine in a
reasonable and responsible manner and
be aware that the user is responsible for
accidents involving third parties or their
property.
Make sure that you are familiar with the
controls and use of the machine.
The machine must only be used by
persons who have read the instruction
manual and are familiar with operation of
the machine. The user should seek expert
and practical instruction prior to initial
operation. The user must receive
instruction on safe use of the machine
from the vendor or another expert.
During this instruction, the user should be
made aware that the utmost care and
concentration are required for working with
the machine.
Only give or lend the machine, including
any accessories, to persons who are
familiar with this model and how to operate
11